Standard

Hydra2 DH S

Built For

Full E and Full Send

Sizes

27.5" | 29"

Hole Count

32

Rim Inner Width

31.0mm

Our strongest aluminum rims and j-bend steel spokes keep the cost of the Hydra2 DH S down while delivering a wheelset that can stand up to the most abusive DH tracks around the world. Pinch flats are a distant memory thanks to our hollow bead wall technology, and Hydra2’s immediate engagement grants you the precision to pull off your dream lines. No matter what you’re attempting, the Hydra2 DH S is perfectly suited to soaking up big hits on the way down and braaapping back up to the top on the next generation of ebikes.

Features

6 Pawl HYDRA2 Freehub Body

Our groundbreaking 870 P.O.E. Hydra2 Freehub body engages every .41 degrees yielding telepathic control.

E-Bike Approved

Approved for use on Full Power Class 1 Ebikes

Hollow Bead Wall

Hollow Bead Wall promotes increased pinch flat protection and impact resistance.

S-Series

"S" is for "Steel" - Employing traditional j-bend steel spokes paired with our J-Bend hub series in an economical, easy to service package

12 Custom Colors

Design the wheelset of your dreams using our custom wheel configurator. Pick and choose from 12 different anodized colors to create a look as colorful or stealth as you wish.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or j-bend hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim Weight
27.5"2045g955g1090g590g
29"2165g1015g1150g630g
Tire WidthTire TypeRider, Bike, and Gear WeightInner Rim WidthOuter Rim Width
2.3-2.6Tubeless or Tube-Type Clincher330lbs or 150kg max 31.0 mm40.0 mm

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Product must be purchased new from authorized dealer, valid for the original owner exclusively. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty. Use of tire inserts, tire casing type or tire air pressure being ridden does not alter or modify this warranty. Alloy rims can still be susceptible to impact damage when riding inserts, and/or using tires with heavy duty casings, and/or inflated to higher pressures.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.